Description:
The plat type blister packing machine carries on to the
drugs(troche、 capsule ) food, the medical treatment apparatus and
its similar material .As the packing equipment of the blister type
aluminum (PVP)/ plaster (PVC) has taken pressure forming,
heat-sealing, so the product come out smoothly and solid.
DPP-350F packing machine, our fourth generation, based on type
DPP-140F, DPP-250 FI, DPP-350, adopts frequency conversion to
adjust the speed and automatic control technique and innovate and
design to the standard GMP . It has many functions such as,
adjustable stroke、partial、combination、two uses AL/PLAL/AL , capsule
directional turning . The technique fills up the local blank, its
comprehensiveness stands for the leader and more active than the
imports.
Features:
1、The whole machine can be packaged by parts when carried into the
lift and workshop, use bolt to fix the cylindrical pin when combine
it. Easily installment.
2、Fix the mould with orientation pin.
3、Adopting frequency conversion to adjust the speed: the punch
frequency can be set according to the range and the filled material
(it can reach 30 times/min.).
4、The heating plate can open and shut automatically and postpone to
switch on while the heating plank laying down, so limit the cost of
plastic in one round of working.
5、The cylinder automatically lifts the checkered plate when the
machine stops working. The blister deformation case caused by the
heat radiation during the sop period is eliminated. It is easy to
clean the net plate. At the same time, the butter action is
provided as the super pressure, which extends the lifespan of the
machine.
6、Heat-sealing: the plane of the mould can be point-moire (also
line-moire). Plates will be flat under equal pressure, at the same
time, the heat-sealing capability rises.
7、When PVC is over, it breaks, rings, stops automatically so that
the operator can change and connect PVC continuously.
8、All the parts which touches with the medicine includes the funnel
for adding, adopts stainless steel and safe material to the
standard GMP”.
Main Technical Parameters:
Terms | Unit | Parameters |
Punch Frequency Max | Times/Min | 30 |
Production Capacity | Thousands Caplets/H | |
Range Of Working Travel | Mm | 30-120 |
Max. Formed. Area | Mm | 350×112 |
Max. Formed Depth | mm | 12mm (25mm for special) |
Formation Heating Efficiency (Upper&Lower) | KW | 2.5*2 |
Heat-Sealing Efficiency | KW | 1.25 |
Power | KW | 3phases,4lines 380V 50HZ (220V 60HZ) 10KW |
Motor Power | KW | 2.2 |
Volume Flux Of Air Pump | m3/min | 0.6 |
Packing Material | PVC | mm | 0.25(0.15-0.5)×350 |
Heat-Sealing Al-Foil | mm*mm | 0.02×350 |
Overall Mechanism | L×W×H | 3430×835×1590 |
Packing Box | L×W×H | 4230×915×2390 |
Weight |